Description
A desktop stand that keeps your airbrushes upright and ready between coats. Each cradle is an angled tube — the nose of the airbrush slides down inside it, so the brush sits nose-down and tilted back, held steady without anything clamping onto the trigger or the hose.
- Two Sizes - Holds two or three airbrushes. Same depth and height either way; only the width changes, so a bigger stand won't eat more bench depth.
- Nose-Down Cradles - Each cradle takes an airbrush nose up to 12.4 mm across, just under 1/2". Drop it in from above through the open slot — no threading it down from the top.
- Drip Catches - Recessed channels in the base sit under each cradle to catch drips and cleaning fluid running off the brush, instead of letting it spread across your bench.
- Angled to Rest - Cradles sit at 30° on the two-brush stand and 33° on the three, holding each airbrush clear of the surface and easy to lift straight out.
- Stable Base - A wide, flat footprint and a low centre of gravity keep it planted, even with a hose pulling on it.
- High Quality 3D Print - Made from safe, durable matte black PLA for long lasting use.
- Expertly Crafted by Terrain Genesis - Made in the USA.
Two Airbrush Stand Dimensions:
4 15/16" (125.9 mm) Base Depth
4 1/16" (103 mm) Base Width
2 13/16" (72 mm) Height
12.4 mm (just under 1/2") Cradle bore
2 1/8" (54.4 mm) Cradle spacing, centre to centre
30° Cradle angle above horizontal
Three Airbrush Stand Dimensions:
4 15/16" (125.9 mm) Base Depth
4 15/16" (125.6 mm) Base Width
2 13/16" (72 mm) Height
12.4 mm (just under 1/2") Cradle bore
1 1/2" (38.5 mm) Cradle spacing, centre to centre
33° Cradle angle above horizontal
Millimetre values are exact. Inch values are rounded to the nearest 1/16".