Matte black carbon fiber look 3D printed 8 knife display stand holding eight closed folding knives in stacked slots
8 Knife Display Stand dimensions in inches and millimeters: 6.46 in (164 mm) depth, 6.50 in (165 mm) height, 3.46 in (87.8 mm) maximum width including bar ends, approximately 2.75 in (69.8 mm) interior spacing, and 0.709 in (18 mm) handle-slot opening.
Close-up of the matte black carbon fiber look side panel on the 8 Knife Display Stand
Side view of the 8 Knife Display Stand showing the eight stacked tiers and crossbar assembly
Front view of the 8 Knife Display Stand loaded with folding knives in the stacked slots
8 Knife Display Stand fully loaded with eight folding knives on a shelf
8 Knife Display Stand fully loaded with eight closed folding knives, one per tier
8 Knife Display Stand feature graphic: tool-free friction fit assembly in under a minute
8 Knife Display Stand feature graphic: two-point handle support with no blade-on-blade or metal-on-metal contact
Roll over image to zoom in Click on image to zoom
Matte black carbon fiber look 3D printed 8 knife display stand holding eight closed folding knives in stacked slots8 Knife Display Stand dimensions in inches and millimeters: 6.46 in (164 mm) depth, 6.50 in (165 mm) height, 3.46 in (87.8 mm) maximum width including bar ends, approximately 2.75 in (69.8 mm) interior spacing, and 0.709 in (18 mm) handle-slot opening.Close-up of the matte black carbon fiber look side panel on the 8 Knife Display StandSide view of the 8 Knife Display Stand showing the eight stacked tiers and crossbar assemblyFront view of the 8 Knife Display Stand loaded with folding knives in the stacked slots8 Knife Display Stand fully loaded with eight folding knives on a shelf8 Knife Display Stand fully loaded with eight closed folding knives, one per tier8 Knife Display Stand feature graphic: tool-free friction fit assembly in under a minute8 Knife Display Stand feature graphic: two-point handle support with no blade-on-blade or metal-on-metal contact

8 Knife Display Stand for Folding Knives

Terrain Genesis
Price:
$19.95

Description

Eight Knives. One Shelf. Nothing Touching.

The Terrain Genesis 8 Knife Display Stand for Folding Knives puts your collection on display in a compact stepped layout. Eight tiers give each closed folder its own display position, keeping your collection organized and easy to view.

Each knife rests across two side panels for two-point handle support. The stand ships flat and assembles with friction-fit crossbars — no tools, glue, or hardware required.

Matte black, carbon-fiber-look side panels give the stand a clean finish for shelves, desks, display cases, and collector setups. 3D printed in the USA by Terrain Genesis.

Features

  • Holds 8 folding knives: One knife per tier in a stepped display layout.
  • Two-point handle support: Each knife rests securely across both side panels when correctly sized and positioned.
  • Carbon-fiber-look side panels: Matte black finish with a distinctive textured appearance.
  • Tool-free friction-fit assembly: Crossbars connect the side panels without glue or hardware.
  • Compact footprint: Approximately 6.46″ × 3.46″ (164 × 87.8 mm), including projecting bar ends.
  • Made in the USA: 3D printed by Terrain Genesis.

Dimensions & Specifications

  • Capacity: 8 closed folding knives, one per tier.
  • Length / depth, front to back: 6.46″ (164 mm).
  • Height, bottom to highest point: 6.50″ (165 mm).
  • Maximum assembled width: 3.46″ (87.8 mm), including projecting bar ends.
  • Interior spacing between side panels: Approximately 2.75″ (69.8 mm), measured between the inside panel faces.
  • Crossbar end-to-end length: 3.46″ (87.8 mm). This is the maximum stand width, not the interior gap.
  • Clear handle-slot opening: 0.709″ (18 mm).
  • Finish: Matte black with carbon-fiber-look side panels.
  • Assembly: Tool-free friction fit.

Dimensions are nominal, based on the supplied design at 100% print scale with the crossbars fully seated. Inch values are rounded; printed dimensions and fit may vary slightly.

Will Your Knife Fit?

Check both the handle's supported length and its thickness before ordering.

1. Handle length and support

The closed knife must bridge the approximately 2.75″ (69.8 mm) interior gap and have enough handle resting securely on both side panels. A handle that only matches the gap length does not provide adequate support. Overall closed length alone is not a fit guarantee: handle shape, taper, and the position of the contact points also matter.

2. Handle thickness, including the pocket clip

Each slot has a nominal 0.709″ (18 mm) clear opening. Measure the handle at the areas that will sit in the slots, including the pocket clip or any projecting hardware. Allow clearance rather than relying on an exact 18 mm fit.

Note: Designed for closed folding knives. Knives shown are not included.

You may also like

Recently viewed