{"product_id":"8-knife-display-stand-for-fixed-knives","title":"8 Knife Display Stand for Fixed Knives","description":"\u003ch2\u003eEight Fixed Blades, Each One Standing On Its Own.\u003c\/h2\u003e\n\u003cp\u003eFixed blades don't sit in a slot the way a folder does. They need a groove that takes the blade and a rest for the handle, spaced to match the knife. That is exactly what this stand is.\u003c\/p\u003e\n\u003cp\u003eEach of the eight tiers pairs a \u003cstrong\u003e65° V-groove\u003c\/strong\u003e on one side with a \u003cstrong\u003eflat handle shelf\u003c\/strong\u003e on the other. The blade drops edge-down into the V, the handle sits on the shelf behind its retaining lip, and the knife holds its position without anything clamping it.\u003c\/p\u003e\n\u003cp\u003eThe groove opens to \u003cstrong\u003e1\/4\"\u003c\/strong\u003e and runs 65°, so the blade is carried on its flats — the wider the stock, the higher it rides. The bottom of the V is not a point: it finishes in a \u003cstrong\u003e1 mm flat\u003c\/strong\u003e, so a thin blade lands on a small flat face rather than being driven into a sharp corner. Everything the knife touches is matte PLA, far softer than blade steel, and there is no metal anywhere in the stand.\u003c\/p\u003e\n\u003cp\u003eEight tiers step back at a 1\" pitch, so every blade in the rack is visible at once rather than the front knife hiding the seven behind it. Load it top to bottom and the whole collection reads in a single glance.\u003c\/p\u003e\n\u003cp\u003eIt ships flat. Two crossbars have forked ends that slide over the side panels and grip them on a friction fit — no tools, no glue, no hardware, together in under a minute. Flat-pack also means a smaller box and less to go wrong in transit.\u003c\/p\u003e\n\u003cp\u003eMatte black side panels in a carbon fiber look finish. Matte matters more with fixed blades than with folders: a satin or mirror-polished blade reads properly against a non-reflective backdrop instead of bouncing light back into the camera. Printed in the USA by Terrain Genesis.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds 8 fixed blade knives, one per tier\u003c\/li\u003e\n\u003cli\u003e65° V-groove carries the blade on its flats, with a 1 mm flat at the bottom instead of a sharp vertex\u003c\/li\u003e\n\u003cli\u003eTakes blade stock up to 1\/4\" thick\u003c\/li\u003e\n\u003cli\u003e7\/8\" deep handle shelf with a 3\/8\" retaining lip\u003c\/li\u003e\n\u003cli\u003e1\" tier spacing keeps all eight blades in view\u003c\/li\u003e\n\u003cli\u003eMatte PLA throughout — no metal anywhere in the stand, and no blade-on-blade contact\u003c\/li\u003e\n\u003cli\u003eTool-free friction fit assembly — no glue, no hardware\u003c\/li\u003e\n\u003cli\u003eMatte black carbon fiber look side panels\u003c\/li\u003e\n\u003cli\u003ePrinted in the USA by Terrain Genesis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 fixed blade knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 7 3\/4\" deep × 5 3\/4\" wide × 7 7\/8\" high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior span between panels:\u003c\/strong\u003e 5\" (127 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade groove:\u003c\/strong\u003e 1\/4\" wide, 65° included angle, 4.2 mm deep, 1 mm flat at the bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle shelf:\u003c\/strong\u003e 7\/8\" deep with a 3\/8\" retaining lip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTier spacing:\u003c\/strong\u003e 1\" vertical, 15\/16\" horizontal step-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel thickness:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e two crossbars, forked friction fit — no tools or hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte black, carbon fiber look side panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill Your Knives Fit?\u003c\/h3\u003e\n\u003cp\u003eTwo things decide it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade thickness — 1\/4\" or less.\u003c\/strong\u003e Measure the stock at its thickest point, usually just ahead of the handle. Anything at or under 1\/4\" seats in the groove. Thicker stock rides high and won't sit securely. Most hunting, bushcraft and camp knives are well inside this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall length — long enough to bridge 5\".\u003c\/strong\u003e The panels stand 5\" apart, and the knife has to span that gap with its blade in the groove and its handle on the shelf. A knife shorter than 5\" overall has nothing to rest on at one end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Designed for fixed blade knives. Knives shown are not included.\u003c\/p\u003e","brand":"Terrain Genesis","offers":[{"title":"Default Title","offer_id":54080849969347,"sku":"TG-KFD-001","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0273\/0839\/2523\/files\/8_Knife_Stand_Shopify-Hero_2e6d9648-305c-4255-836d-758835cd6621.png?v=1788909397","url":"https:\/\/terraingenesis.com\/products\/8-knife-display-stand-for-fixed-knives","provider":"Terrain Genesis","version":"1.0","type":"link"}